Socket Head Cap Screw Full Thread 316 Stainless Steel 7/8-9 * 7" [Cup Point] [Allen Drive] length_9

Socket Head Cap Screw Full Thread 316 Stainless Steel 7/8-9 * 7" [Cup Point] [Allen Drive] length_9These screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive. Length is measured from under the head. The screw has a length of 7" and a thread of 7 8 9. Coarse threads are the industry standard: choose these screws if you dont know the pitch or threads per inch. Screws that meet ISO 4762 (formerly DIN 912) comply with specifications for dimensional standards.

The screws have a thread of 1-1/8-7 and a length of 7

The screw has a length of 3-1/4" and a thread of 1/2-13

This socket head cap screw is 220 mm long and has a M30 * 3

The screw has a length of 3-3/4" and a thread of 1/2-13

Forests have a length of 4-3/16 and a diameter of 15/32

This carriage bolt has a length of 7" with a threading of 5/8-11 [Partially Threaded]

the inside threads have a thread of 2-1/2-8

Bronze screws are about 40% stronger than brass screws and provide more corrosion resistance to salt water

This rod has a length of 36 and a thread of 1/2-13

This hexagonal bolt has a length of 8" with a threading of 1-1/2-6 [Partially Threaded]

The screw has a length of 18 and a diameter of 5/8

The screw has a length of 4-1/2" and a thread of 1/2-13